Frequently Asked Questions

A. In order to reach the working position, the raised machine (transport position), was lowered onto the material to shred
Remedy = Make the machine get to its working position before shredding

A. Working position too low, blades or rams are touching the ground
Remedy = Adjust the height of the rotor with respect to the ground

A. Blades or rams worn or broken
Remedy = Replace worn-out or broken parts.

B. Blades or rams locked by pins
Remedy = Clean and grease pins

C. Rotor balancing not correct
Remedy = Check the weight of the blade or ram units

D. Rotor bearings worn
Remedy = Dismount and replace bearings and seals