Linkage Turbomiser sprayer with P45E fan and your choice of sprayer heads. Also features CD32 centrifugal pump.
Turbomiser sprayer ideal for smaller to medium sized crops with air shear
technology to get to these hard to reach canopies. Available with a range
of spray heads for hot house use, vineyards, olive groves and other small tree crops
CD32 centrifugal pump 140L/min. constructed from
toughened nylon. Stainless steel shaft and viton/ceramic seal.
P45E: 450 mm dia. turbine fan, 4500 rpm. Air speed 188 m/s, 675 km/h. Air volume 5400 m3h, 3180 cfm.
Power consumed 28 kw / 40HP.
NOZZLES: Air shear
Two sided electric on/off control with control box mounted
in cabin. Rotary plate distribution regulators with 15 settings.
Multiplication type through multi-grip, multi-vee belt and pulley, over-run free wheeling hub
Polytuff impact resistant polyethylene construction,
calibrated sight line, non-spill lids, hydro chemical mixer in larger basket,
lids with basket strainers,separate in-built 18 litre fresh water hand wash tank.
Galvanised RHS steel construction, cat II linkage
Bypass and pneumatic
Protected 100 mm glycerine gauge fitted at front of sprayer
Lid strainer and suction line strainer
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover
HP REQUIRED: Minimum 35 PTO HP
Super cannon for P45E (GT45-1)
Manual turntable for Super Cannon (GT55-4)
Double sided diffuser head (5 outlets per side) for P45E (GT45-2)
Vineyard/skiprow head 4 heads 4x4 (plus 2extra cannons) for P45E (GT45-16)
|Minimum Tractor Size||35.00 HP|
|Tank Size||400.00 litres|
|Pump Size||140.00 L/min|
|Height/Width/Depth||1,150mm / 1,100mm / 1,000mm|
|Product Weight||207.00 KG||